系列: Fight
Meet the Fight 1500.1 — a compact monoblock that punches far above its weight class. Built to stay rock-solid all the way down to 1 Ohm, it delivers the kind of relentless, chest-hitting bass that most amplifiers this size can only dream of. Small enough to fit into the tightest installations, powerful enough to run serious subwoofer setups — this is maximum output per square inch.
Total control comes standard. A full tuning arsenal — adjustable Low Pass and Subsonic filters, a steep 24 dB/Oct crossover slope, dedicated bass level and bass frequency adjustment, and a phase shifter — lets you dial in your bass exactly the way you want it. Add a wide working voltage range and impressive efficiency, and you get an amplifier that stays stable and distortion-free no matter how hard you push it.
Whether you are building your first serious bass system or upgrading to something that truly slams, the Fight 1500.1 is ready for the battle.
| 模型 | Fight 1500.1 |
| Class | D |
| Number of the channels | 1 |
| 频率响应 | 10-250 Hz |
| 1 Ohm RMS Power (14.4 V) | 1500 W |
| 1 Ohm RMS Power (12 V) | 1030 W |
| 2 Ohm RMS Power (14.4 V) | 1100 W |
| 4 Ohm RMS Power (14.4 V) | 700 W |
| Minimum permissible load on the channel | 1 Ohm |
| Input SPL | 0.3 - 8 V |
| 低通滤波器 | 50-250 Hz |
| Crossover | 24 dB/Oct |
| 亚音速滤波器 | 10-55 Hz |
| 低音频率调整 | 45 Hz |
| Input terminal | 4 Ga |
| Output terminal | 10 Ga |
| 阻尼因子 | ≥ 155 |
| Working voltage | 9 - 16.5 V |
| Phase regulation | 0 - 180° |
| Signal-to-noise ratio | ≥ 94 dB |
| Size (W×L×H) | 11.10 × 6.10 × 2.09 inch |
| Gross weight | 6.31 lb (2.86 kg) |
